Franklin Fueling Systems T5 Series Fuel Management System Programming Guide - Manual (Page 31)

27
Dispenser Interface
The Dispenser Interface is used in VRM and Reconciliation applications to communicate sales data from the dispensers
to the console.
Group Name
Parameter
Name
Parameter
Default
Description Parameter Input
Dispenser Interface
Precision
Volume Precision (3) The number of digits to the right of the decimal point. 0-6
Dispenser Volume (Gross) Select Gross if the dispenser volume is not temperature
compensated.
Gross / Net
Grades
Number of Grades (0) The number of grades that are on site. 0 - 32
Name (1) Given name of Grade abc#
Include in Vapor
Recovery
(Yes) Select yes if this grade will be used in VRM.
Yes / No
Dispenser Interface Modules: DIM 1
Type (Wayne) The type of communication from the dispensers. None
Gilbarco
Wayne
Tokheim
G Site
Bennett 515
Communication (Currant Loop) The communication protocol of the distribution box. None
Current Loop
RS422 / 485
Tokheim STD
RS232 Duplex
RS232 RxD x 1
RS232 RxD x 2
Fueling Points
Number of fueling
points*
(0) The number of possible fueling points on site
0 - 32
Number of hoses (0) The number of grades on this dispenser. 0 - 8
Hose # (1)
Grade
Association
(Unknown) The grade that is associated with the first hose you dispensed
from.
Select the correct
grade from the
Grades menu.
Position (0) The number that was detected from the Query function after a
dispense.
0 - 9
* Q The query function is used to determine the Position number from the dispensers.
C Will copy the Position numbers and Grade associations to all like number of hoses fueling points.
The copy and query functions are available only via the Web Browser Interface.
If using the console touch-screen, the “Auto-configure” button will initiate the query function.