Extron Electronics MLC 226 IP Series Installation - Manual (Page 96)

SIS ™ Programming and Control, cont’d
MLC 226 IP Series • SIS Programming and Control 5-18
PRELIMINAR
Y
Command/r
esponse table for SIS commands (continued)
Command
ASCII (T
elnet)
(host to switcher)
URL Encoded (W
eb)
(host to switcher)
Response (switcher to host)
Additional description
Firmwar
e version, part number and information r
equests
N
In a query r
esponse, an asterisk (
*) after the version number indicates the version that is curr
ently used.
A
question mark (
? or
?.??
) indicates that the factory default fi
rmwar
e is the only fi
rmwar
e loaded in the MLC.
A
carat (
^
) indicates the version of fi
rmwar
e that should be running, but, since a mode 1 r
eset was performed, the factory default fi
rmwar
e version is loaded and running instead.
An exclamation point (
!) indicates that the fi
rmwar
e is corrupted.
N
Responses to commands differ depending on which, if any
, verbose r
esponse mode the MLC is in. See the CV command (
E
X2@
CV
}
) under IP setup commands later in this
table.
Query fi
rmwar
e version number
Q
or
1Q
Q
or
1Q
X1!
]
or
V
er01*
X1!
]
Show the MLC’s fi
rmwar
e version (
X1!
)
to two decimal places. This query yields the number of the curr
ently r
unning version of
the user
-updatable fi
rmwar
e
Example:
1Q
1Q
1.01 or
V
er01*1.01
Query verbose fi
rmwar
e version information
0Q
0Q
{r
esponse fr
om 2Q}–{r
esponse fr
om 3Q}–{r
esponse fr
om 4Q}
]
or
V
er00*{
response fr
om 2Q}–{r
esponse fr
om 3Q}–{r
esponse fr
om 4Q}
]
Show the bootstrap, factory-installed, and updated fi
rmwar
e versions.
See 2Q, 3Q, and 4Q below
.
Example:
0Q
0Q
1.03-1.00(1.18-MLC226 -Thu, 20 Jan 2005 09:41:47 GMT)-1.01*(1.31-MLC226 -T
ue, 14 Jun 2005 00:54:58 GMT)
]
Query bootstrap fi
rmwar
e
version
2Q
2Q
X1!
]
or
V
er02*
X1!
]
The bootstrap fi
rmwar
e is not user
-
replaceable, but you may need this information during tr
oubleshooting.
Example:
2Q
2Q
1.03
]
Query factory fi
rmwar
e
version
3Q
3Q
X1!
(kernel version–model description–date time of upload)
]
or
V
er03*
X1!
(kernel version–model description–date time of upload)
]
Factory-installed fi
rmware is different from
the bootstrap fi
rmware, but it is also not user-
replaceable. This fi
rmware was installed at
the factory; it is the version
the co
ntr
oller
reverts to after a mode 1 r
eset (see ch. 2).
Example:
3Q
3Q
1.00(1.18-MLC226 -Thu, 20 Jan 2005 09:41:47 GMT)
]
In this example the factory fi
rmwar
e
version
is 1.00 and the IP
Link kernel version is 1.18
for the MLC 226, dated 20 January 2005.