beautypg.com

Resetting the mlc and restoring its configuration, Preliminar y – Extron Electronics MLC 226 IP Series Installation User Manual

Page 157

background image

B-9

MLC 226 IP Series • Firmware Updates

PRELIMINAR

Y

Resetting the MLC and restoring its confi guration

After a fi rmware update you must reset the unit. Resetting the MLC also removes
confi guration information, so replace the MLC’s confi guration after resetting.

1.

Perform a ZY reset, which is an absolute system reset excluding IP settings (IP
address, subnet mask, gateway IP address, unit name, DHCP settings, port
mapping). This allows you to maintain communication with the MLC.

If using Telnet or HyperTerminal, enter

E

ZY

}

.

If using a Web brower connection, enter W ZY

|

.

N This command is supported by MLCs with fi rmware of version 1.03 or higher.

2.

Using Global Confi gurator, restore (build) the previously saved project to the
MLC.