Extron Electronics MLC 226 IP Series Installation - Manual (Page 71)

4-27 MLC 226 IP Series • Software-based Confi guration and Control
PRELIMINAR
Y
• IR Drivers — This Web page lists IR driver fi les only and allows you to select a
fi le to see and execute the commands stored in them. This page is available only
to those logged in with administrator level access.
N The MLC must fi rst be confi gured with Global Confi gurator before this page can
be used.
An example for a specifi c IR driver is shown below.
• Serial Devices’ Drivers — Once the ports have been set up in the confi guration
program, each confi gured serial port (projector control port and any IR/Serial
control ports) is listed in this section of the Control page
menu.
Click on a port name to bring up a page that shows the
available commands for the device cabled to that port. See
the sample screen shots on the next page.
If you want to execute a command that is available in the driver (whether
associated with an MLC button or not) for a confi gured device, you can click on a
button or select an option from a pull-down menu to execute that command.
N You must use Microsoft Internet Explorer version 6.0 or higher with Active X
enabled in order to use the serial devices’ control pages.