Initial setup – Xylem CHATTER RTU and E-mail User Manual
Page 8
USERS MANUAL
CHATTER™ DATA LOGGER
8
Initial setup
The initial setup - or physical setup - of a Chatter™ Data Logger consists of some steps. Which steps depends on
your model of Chatter™ Data Logger:
Panel mount model
Tube mount model
Unpack the Chatter™ Data Logger
A dditional inform ation:
Package content, panel mount model
Unpacking the Chatter™ Data Logger
A dditional inform ation:
Package content, tube mount model
Opening the Chatter™ Data Logger
A dditional inform ation:
Open the panel mount Chatter™ Data Logger
Opening the Chatter™ Data Logger
<% A D D INFO %
Insert cable glands
A dditional inform ation:
Insert cable glands, panel mount model
Not needed, the sensor connects with an
electrical plug.
Connect the antenna
A dditional inform ation:
Connect the antenna, panel mount model
Not needed, the internal antenna is already
connected.
Insert SIM-card,
A dditional inform ation:
Insert a SIM-card, panel mount model
Insert SIM-card,
A dditional inform ation:
Insert a SIM-card, tube mount model
Connect sensors
A dditional inform ation:
Connect sensors
A dditional inform ation:
Turn on the Chatter™ Data Logger
A dditional inform ation:
Turn on the Chatter Data logger
Turn on the Chatter™ Data Logger
A dditional inform ation:
Turn on the Chatter Data logger
Configure the Chatter™ Data Logger using Chatter™
Link
A dditional inform ation:
Configuration with Chatter Link
Configure the Chatter™ Data Logger using
Chatter™ Link
A dditional inform ation:
Configuration with Chatter Link
Re-assemble the Chatter™ Data Logger.
A dditional inform ation:
Re-assemble the Chatter Data logger
Mount the Chatter™ Data Logger at its working
location
A dditional inform ation:
Mount the Chatter™ Data Logger at its working
location
A dditional inform ation:
10
23
11
24
12
13
14
25
15
29
20
26
44
44
31
21
27