Xylem CHATTER RTU and E-mail - Manual (Page 130)

USERS MANUAL
CHATTER™ DATA LOGGER
130
SMS setup
This pane shows data related to the Chatter™ Data
Logger. The data is only available when your PC is
connected to the Chatter™ Data Logger with a USB-
cable
See below for a detailed description of each part in this
pane.
Add battery voltage to message
When the Chatter™ Data Logger sends an SMS message, it can add the current battery voltage to the
SMS message
Select No if you don't want the battery voltage to be a part of the text in the SMS message
Select Yes if you want the battery voltage to be a part of the text in the SMS message
Add start/stop times to message
Help text goes here
Add signal strength to message
When the Chatter™ Data Logger sends an SMS message, it can add the current signal strength to the SMS
message
Select No if you don't want the battery voltage to be a part of the text in the SMS message
Select Yes if you want the battery voltage to be a part of the text in the SMS message
A dditional inform ation:
Location in register list
188