Product details pane – Xylem CHATTER RTU and E-mail User Manual
Page 52
USERS MANUAL
CHATTER™ DATA LOGGER
52
Product details pane
This pane shows data related to the Chatter™ Data
Logger.
The data shown are only accurate when
your PC is connected to the Chatter™
Data Logger with a USB-cable, otherwise it
will show the data from the last time, you
were connected to the Chatter™ Data
Logger
See below for a detailed description of each part in this
pane.
Firmware version
The Chatter™ Data Logger has its current firmware version number embedded in one of its chip. It is for
your information only, you cannot change it.
A dditional inform ation:
Hardware version
The Chatter™ Data Logger has its hardware version number embedded in one of its chip. It is for your
information only, you cannot change it.
A dditional inform ation:
Firmware build time
Show when the firmware currently in the Chatter™ Data Logger was built.
You must provide this information if you are requesting support from MJK Automation ApS
Number of restarts
Shows how many times the Chatter™ Data Logger has restarted. It is for your information only, you cannot
change it.
The Chatter™ Data Logger does not normally restart, but cycling power or replacing the battery will make
the Chatter™ Data Logger restart.
A dditional inform ation:
Chatter on-chip serial number
Each Chatter™ Data Logger has a serial number embedded in one of its chip. It is for your information
only, you cannot change it.
A dditional inform ation:
Last change of configuration
Shows the last time when the configuration for this Chatter™ Data Logger was saved.
188
188
188
188