Xylem CHATTER RTU and E-mail - Manual (Page 63)

USERS MANUAL
CHATTER™ DATA LOGGER
63
Stormflow conditional
Use this window to set the way stormflow detection and
recording will operate.
Start time
Select how many minutes the first spill must be above the
set limit before it is accepted as a stormflow.
Stop timeout
Select how many minutes the level must be below the set
limit before it is accepted as a terminated stormflow.
Start volume
Enter how many litres litres the first spill must contain
before it is accepted as a stormflow.
Signal name
Select an existing signal name or enter a new signal name.
The signal name will act as an identifier for this input, inserted into any SMS messages and e-mails sent
from this Chatter™ Data Logger
A dditional inform ation:
Signal names explained
160