Xylem CHATTER RTU and E-mail - Manual (Page 120)

USERS MANUAL
CHATTER™ DATA LOGGER
120
USB connection
Use this window to set the parameters for when a low
battery condition occurs for this Chatter™ Data Logger
See below for a detailed description of each part in this
pane.
Auto detect USB connected
Select between No and Yes.
If you select Yes, the Chatter™ Data Logger detects when
a USB connection between the Chatter™ Data Logger
and a PC is established.The Chatter™ Data Logger then
automatically goes into configuration mode.
Configuration mode is signalled by a red light
next to the USB connector. You can force the
Chatter™ Data Logger into configuration mode
with the switch next to the USB connector.