Xylem CHATTER RTU and E-mail - Manual (Page 132)

USERS MANUAL
CHATTER™ DATA LOGGER
132
Battery pane
Use this window to set the parameters for when a low
battery condition occurs for this Chatter™ Data Logger
See below for a detailed description of each part in this
pane.
Low battery voltage limit [mV]
Enter the minimum acceptable voltage for the internal battery. When the battery voltage drops below this
limit, a notification appears in the e-mail sent by this Chatter™ Data Logger
MJK Automation ApS recommends that the low battery voltage limit is set to 3.100 mV.
Signal name
Select an existing signal name or enter a new signal name.
The signal name will act as an identifier the low battery voltage condition, inserted into any SMS
messages sent from this Instrument Net input.
Additional information:
Signal names explained
160