Xylem CHATTER RTU and E-mail - Manual (Page 118)

USERS MANUAL
CHATTER™ DATA LOGGER
118
GSM/GPRS setup
Use this window to set the parameters necessary for
communicating via GSM or GPRS with the built-in
modem.
See below for a detailed description of each part in this
pane.
Pin code for SIM-card
If the SIM-card for this Chatter™ Data Logger has a pin code you must enter it here. The pin code for the
SIM-card
can not be longer than 10 characters.
Modem init string
Enter the command used by the internal GSM modem for setting up communication in special situations.
The default value is blank.
Connection timeout [sec]
Enter the number of seconds the modem can be online without sending or receiving data before it hangs
up.
The default value is 120 seconds.
Modem max. online time
Select the number of minutes the modem in the Chatter™ Data Logger is allowed to be online at during a
single data- or alarm call.
The default value is 10 minutes, this prevents the modem from being online forever.
The modem in the Chatter™ Data Logger is forcibly disconnected when the Max. online time is
reached. This prevents the modem from staying online indefinitely in case of an error.