ZyXEL Communications Centralized Network Management Vantage CNM - Manual (Page 307)

Chapter 21 CNM System Setting
Vantage CNM User’s Guide
307
21.6.2 Add/Edit VRPT Management
Use this screen to configure a VRPT server. To open this screen, click Add or Edit in the
CNM System Setting > Configuration > VRPT Management screen.
Figure 176 CNM System Setting > Configuration > VRPT Management > Add/Edit
The following table describes the labels in this screen.
Table 151 CNM System Setting > Configuration > VRPT Management > Add/Edit
LABEL DESCRIPTION
Name Enter a descriptive name of the Vantage Report instance in Vantage
CNM. You must use 3-28 alphanumeric characters, underscores (_),
dashes (-), or periods (.).
Syslog Server Address Enter the IP address of the Vantage Report server.
Description Type a description, if desired, for the Vantage Report instance. You can
use up to 255 printable ASCII characters.
Add Devices to VRPT Server Click the icon and the associated devices screen appears where
you can select associated device(s) to this VRPT server. Click Add to
return to the previous screen and the selected device(s) display in the
Associated Devices field. When you click Apply, Vantage CNM
automatically configures these devices to send log messages to this
Vantage Report. It does not change any settings for log categories or
traffic statistics, so you might have to change these manually. See
Table 225 on page 414 .
To unassociate a device to the VRPT server, click the icon and
unselect the associated device from the list. Then click Add. When you
click Apply, Vantage CNM automatically resets the syslog settings to
their default values for devices that previously used the specified
Vantage Report server. It does not change any settings for log
categories or traffic statistics.
Apply Click Apply to save these changes.
Cancel Click Cancel to return to the previous screen without saving changes.
EX
AMPLE