ZyXEL Communications Centralized Network Management Vantage CNM - Manual (Page 164)

Chapter 6 Device Security Settings
Vantage CNM User’s Guide
164
Enable Report Service Select this option to record content filtering reports on myZyXEL.com. These
reports consist of generated statistics and charts of access attempts to web
sites belonging to the categories you selected in your content filter
configuration. Click Report to go to myZyXEL.com. Then do the following to
view the content filtering reports.
1. Log into myZyXEL.com and click your device’s link to open it’s Service
Management screen.
2. Click Content Filter in the Service Name field to open the Blue Coat
login screen.
3. Enter your Vantage CNM's MAC address (in lower case) in the Name
field. You can find this MAC address in the Service Management
screen. Type your myZyXEL.com account password in the Password
field and click Submit.
External Database
Service License Status
License Status This read-only field displays the status of your category-based content
filtering (using an external database) service subscription.
License Inactive displays if you have not registered and activated the
category-based content filtering service.
License Active and the subscription expiration date display if you have
registered the Vantage CNM and activated the category-based content
filtering service.
Trial Active and the trial subscription expiration date display if you have
registered the Vantage CNM and activated the category-based content
filtering service.
License Inactive and the date your subscription expired display if your
subscription to the category-based content filtering service has expired.
Note: After you register for content filtering, you need to wait
up to five minutes for content filtering to be activated.
Message to display
when a site is blocked
Denied Access
Message Enter a message to be displayed when a user tries to access a restricted
web site. The default message is “Please contact your network
administrator!”.
Redirect URL Enter the URL of the web page to which you want to send users when their
web access is blocked by content filtering. The web page you specify here
opens in a new frame below the denied access message.
Use “http://” followed by up to 120 ASCII characters. For example, http://
192.168.1.17/blocked access.
If you do not specify a URL and a user tries to access a web page containing
a forbidden object, a blocking page displays on the forbidden object.
Apply Click Apply to save your changes back to the device.
Reset Click Reset to begin configuring this screen afresh.
Table 66 Device Operation > Device Configuration > Security > Content Filter > General
LABEL DESCRIPTION