1 add firmware – ZyXEL Communications Centralized Network Management Vantage CNM User Manual
Page 236
Chapter 10 Firmware Management
Vantage CNM User’s Guide
236
10.1.1 Add Firmware
Use this screen to select the firmware you want to upload to Vantage CNM. To open this
screen, click Add in the Device Operation > Firmware Management > Firmware List
screen.
You must upload the whole firmware zip file, which contains the following:
• The device firmware (bin file extension). Only this firmware file is actually downloaded
to the device.
• The device default configuration file (config file extension).
• Device firmware release notes (doc file extension) highlighting.
• Boot module with bm file extension.
• A file with XML file extension. Vantage CNM uses the XML file to gather the device
type, firmware version and release date information.
Besides, you have to make sure the FTP information has been configurated properly in the
CNM System Setting > Configuration > Servers > Configuration. See
Figure 124 Device Operation > Firmware Management > Firmware List > Add
Type the file name and path of the firmware zip file, or click Browse to locate it. You may also
create an alias that appears in the previous screen. Click Apply to load the firmware zip file to
Vantage CNM. Then, click Device Operation > Firmware Management > Firmware
Upgrade if you want to upload the firmware to one or more devices. See
.
Remove
Click to delete a selected firmware from your Vantage CNM firmware
management.
Total Records
This entry displays the total number of records on the current page of the list.
Table 110 Device Operation > Firmware Management > Firmware List (continued)
TYPE
DESCRIPTION