3 device > upgrade – ZyXEL Communications Centralized Network Management Vantage CNM User Manual
Page 239
Chapter 10 Firmware Management
Vantage CNM User’s Guide
239
The following table describes the fields in this screen.
10.3.3 Device > Upgrade
Use this screen to perform the firmware upgrade to the selected device right away or define a
schedule for it. To open this screen, click Upgrade on a firmware entry in the Device
Operation > Firmware Management > Firmware Upgrade screen (Refer to
Figure 128 Device Operation > Firmware Management > Firmware Upgrade (Device) >
Upgrade
Table 112 Device Operation > Firmware Management > Firmware Upgrade (Device)
TYPE
DESCRIPTION
#
This field displays the device number.
FW Alias
This is a descriptive name for the firmware. This is specified when the firmware
is uploaded. See
.
Device Type
This field displays the model. You must upload firmware to the correct model.
Vantage CNM should automatically detect firmware for the device selected.
Uploading incorrect firmware may damage the device.
FW Version
This field displays ZyXEL device firmware version. It is blank if the device has
not been registered.
FW Release Time
This field displays the date the firmware was created.
Admin
This field displays the administrator who downloaded this firmware file to
Vantage CNM.
Upgrade
Click Upgrade to take you to a screen where you can upgrade the selected
firmware to the device.
Total Records
This entry displays the total number of records on the current page of the list.
Back Click
Back to return to the previous screen.