Toshiba STRATA CIX User Manual
Page 92
Telephone Button Programming
500 Series Programs
1-88
Strata CIX/CTX Telephone Button Programming 11/04
570
Account Code Digit
Length
570
,
Hold
Accounting Codes need to be specified for the number of digits that
are expected to be used for registering a number. This allows dialing
within Strata CTX to proceed automatically once the correct account
code is dialed. The following numbers are then dialed digits used for
making the phone call.
A second length is provided to allow the number of digits to be used
for verification of the code to be less than the total code entered; thus,
the code may contain two parts, one required and one part optional to
the user..
570-01
Verified Digit Length
FB01
, n,
Hold
n =
4~15
(default = 4)
The Verified Digit Length sets a number of digits to verify with a pre-
set list. This number may be the same or smaller than the account
code digits set to be entered for creating a complete accounting code.
Note
This field is not changed, when
are registered.
570-02
Registered Digit
Length
FB02
, n,
Hold
,
Hold
n =
4~15
(default = 6)
The Registered Digit Length sets a number for the digits to be entered
to make a complete accounting code entry.
Note
The Registered Digit Length (
FB02
) must be greater than or
equal to the Verified Digit Length (
FB01
).
571
Exception Numbers
for Forced Account
Codes
571
,
Hold
Up to four telephone numbers can be programmed as exceptions to
the forced and /or verified account code entries (including 911).
These special codes enable numbers to bypass the verification
process and proceed unhindered.
571-01
Exception Number 1
FB01
, n,
Hold
n =
Up to 4 digits
Exception 1 default = 911
Exception 2~4 default = no
value
Enter a Forced Account Code Exception.
Note
One of the assigned exception numbers should be 911.
Exception Numbers for Forced Account Code fields cannot
be duplicated.
571-02
Exception Number 2
FB02
, n,
Hold
571-03
Exception Number 3
FB03
, n,
Hold
571-04
Exception Number 4
FB04
, n,
Hold
,
Hold
573
Delete Door Phone
573
,
Hold
This command deletes door phone.
573-00
Door Phone
n,
Hold
,
Hold
n =
1~6 (CTX100)
1~9 (CTX670 Basic)
1~24 (CTX670 Exp.)
Enter the number of the door phone that is to deleted.
576
Door Phone Night
Ring Over External
Page
576
,
Hold
This command assigns a Page Group to ring during system Night
Mode when a door phone button is pressed. The assignment can be
made independently for each Tenant.
576-00
Tenant Number
n,
Hold
n =
1~2 (CTX100)
1~8 (CTX670)
Select the system Tenant number to be assigned Door Phone to Page
Group/Night Ringing.
576-01
Page Group Number
FB01
, n,
Hold
,
Hold
n =
0~4 (CTX100)
0~8 (CTX670 Basic)
0~16 (CTX670 Exp.)
(default = 0)
Select the system Page Group number that should ring for the
selected Tenant when a door phone button is pressed during the
system Night Mode.
577
Caller History
577
,
Hold
This command assigns which station stores Caller ID information for
PDN,CO,GCO and POOL line buttons
577-00
Circuit Type/Number
n,
Hold
n =
Up to 6 digits
Enter the Circuit Type and number. See the
577-01
Primary DN
FB01
, n,
Hold
,
Hold
n =
Up to 5 digits
Enter Station DN to store call history data.
Table 1-35
Programs 500~577
(continued)
Button
Sequence
Value(s)
Summary