Toshiba STRATA CIX - Manual (Page 8)

Telephone Button Programming
Telephone Button Overview
1-4
Strata CIX/CTX Telephone Button Programming 11/04
For example, selecting FB01 in Program 916 displays the first Octet, 192 , on the LCD. To view or change
the next Octet (in this example 168 ) in the IP Address, press the Spkr button. Pressing Spkr again,
displays the following Octet (in this example 255 ).
The following is an example from Program 200,
FB04
.
FB04
is broken down into three sub-parameters as
follows COS DAY1, COS DAY2 and COS NIGHT.
1. At the SELECT PARAM prompt, press
FB04
.
2. At the COS DAY1= prompt, enter a value from 1~32.
3. Press
Spkr
.
4. At the COS DAY2= prompt, enter a value from 1~32.
5. Press
Spkr
.
6. At the COS NIGHT= prompt, enter a value from 1~32.
7. Press
Hold
to submit.
8. Press another
FBnn
button to program more parameters
… or press Hold again to program a new DN.
Note To change one of the sub-parameters, you must proceed through all three sub-parameters before
pressing
Hold . For example, to change the value of COS DAY1, you must change the COS DAY1
value, then press
Spkr
twice, and finally, press
Hold
.