Toshiba STRATA CIX - Manual (Page 90)

Telephone Button Programming
500 Series Programs
1-86
Strata CIX/CTX Telephone Button Programming 11/04
530-03 LCR Action
FB03 , n, Hold
n = 1. Apply (default)
2. Skip and Apply
Select LCR Action.
• Apply ñ (default) Apply LCR to all of the external dialed digits.
• Skip and Apply ñ Apply LCR to the dialed digits excluding the
number of digits specified in Skip Length.
530-04 Digit Modification
Action
FB04 , n, Hold
n = 1. Apply (default)
2. Retain
3. Discard
Select Digit Modification application.
• Apply ñ (default) Apply Digit Modification from the first digit.
• Retain ñ Retain the skipped digits and apply Digit Modification
starting from the next digit specified by Skip Length.
• Discard ñ Discard the skipped digits and apply Digit Modification
starting from the next digit specified by Skip Length.
530-05 Skip Length
FB05 , n, Hold , Hold
n = 0~5
0 = delete (default = 0)
Specify the number of digits at the beginning of the dial string
to be ignored before DR, Digit Modification, or LCR is applied.
531 DR Screening Table
for OLG
531 , Hold
Assigns DR Screening Table for an OLG. Up to four codes may be
assigned per line group. Used for outgoing calls other than LCR.
531-00 OLG
n, Hold
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.) Enter the OLG Number.
531-01 Behind Centrex
Access Code
FB01 , n, Hold
n = Up to 8 digits Enter the access code expected by an attached Centrex PBX.
531-02 Add or Delete Code
FB02 , n, Hold
n = 1. Add
2. Delete (default)
Add or Delete the Code entered above. Leaving the field empty
removes an existing code. Activation requires entries in OLG Group
number and 01 Behind Centrex Access Code above.
531-03 DR Action for Centrex
FB03 , n, Hold
n = 1. Bypass (default)
2. Skip and Apply
Apply DR to the dialed digits.
• Bypass (default) ñ does not apply DR.
• Skip and Applyñ applies DR to the dialed digits excluding the
number of digits specified in Skip Length.
531-04 Skip Length
FB04 , n, Hold
n = 0~8
(default = 0) Enter the number of leading digits to be ignored by DR.
531-05 Pause Insertion
FB05 , n, Hold , Hold
n = 0~10
(default = 0) Enter the length of the pause to be inserted between dialing digits.
532 DR Table Allow/Deny
Definition
532 , Hold
Specify the DR Table Type using this command.
532-00 DRL Number
n, Hold
n = Up to 8 digits Select the DRL Number.
532-01 Table Type
FB01 , n1, Hold , Hold
n1 = 1. Allow
2. Deny (default)
Specify whether this DR Table is an Allow Table or Deny Table.
533 DR Level Table
Assignment
533 , Hold
This program adds or deletes entries in the DR Table associated with
the DRL entered in above.
533-00 DRL Number
n, Hold
n = Up to 16 digits Enter the DRL for which you want to populate an Exception Table.
533-01 Dial String
FB01 , n1, Hold
n1 = 1~ 7 digits may include
wild cards ìXî and ìNî
where X = 0~9 and N =
2~9. Add the dial string you wish to be treated as an exception.
533-02 Add or Delete
FB02 , n2, Hold , Hold
n2 = 1. Add
2. Delete (default)
Add or delete the string entered in 01 DR Exception Table above to
the DR Exception Table.
Table 1-35 Programs 500~577 (continued)
Button Sequence Value(s) Summary