Toshiba STRATA CIX User Manual
Page 35
Telephone Button Programming
200 Series Programs
Strata CIX/CTX Telephone Button Programming 11/04
1-31
T
e
le
phon
e Butt
on
Pr
og
ramm
ing
200-41
Activate Message
Waiting
FB41
, n,
Hold
n =
1.
Enable
2.
Disable
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
Enable: This station is allowed to activate station-to-station message
waiting on other stations by dialing the other station number plus 7, 8
or 9; or, by pressing the Msg key. This feature is available with Strata
CTX R1.3 software.
Disable: This station cannot activate station-to-station message
waiting on other stations by dialing the station number plus 7, 8 or 9.
Notes
•
When disabled, digital telephones are still allowed to activate
station-to-station message waiting by pressing the Msg button.
•
This parameter does not apply to Voice Mail ports to use the
special Message Waiting access codes.
200-42
Tenant Number
FB42
, n,
Hold
,
Hold
n =
1.
1~8. (Default = 1)
Enter the Tenant number to which this PDN should be assigned.
201
Station Delete
201
,
Hold
This command deletes stations.
201-01
Primary DN
FB01
, n,
Hold
,
Hold
PDN or PhDN to be deleted.
202
ISDN BRI Station
202
,
Hold
This command assigns ISDN BRI Stations.
202-00
Primary DN
n,
Hold
.
n =
Up to 5 digits
ISDN BRI circuit Prime Directory Number.
202-01
Equipment
FB01
, xxyyzz,
Hold
xx =
Cabinet 1 (CTX100),
01~02 (CTX670 Basic),
01~07 (CTX670 Exp.)
Enter the BRI equipment number assigned to this PDN. This is the
cabinet, slot, and circuit number of the RBUU/RBUS or RBSU/RBSS
interface PCB to which the the PDN is, or should be, assigned. Enter
data as xxyyzz:
Example: If the PDN should be a assigned to a BDKU in cabinet 5,
slot 2, circuit 3; enter 050203.
Cabinet numbers:
•
CTX100: Select 01 for Base and Expansion cabinet.
•
CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
Slot numbers:
•
CTX100: Select 01~04 for Base slots and 05~08 for Expansion
slots.
•
CTX670: Select 01~08 for Base slots and 01~10 for Expansion
slots.
yy =
Slot 01~8 (CTX100),
01~10 (CTX670)
zz =
Circuit (01~04)
202-02
ISDN Channel Group
FB02
, n,
Hold
n =
1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.)
Channel Group Number.
202-03
ISDN Protocol
FB03
, n,
Hold
n =
1.
National ISDN
2.
ETSI
3.
TTC
4.
National ISDN - Nortel
Protocol
202-04
Type Connection
FB04
, n,
Hold
n =
1.
Point to Point
2.
Point to Multi Point
Connection format
Table 1-14
Programs 200~202
(continued)
Button
Sequence
Value(s)
Summary