Toshiba STRATA CIX - Manual (Page 139)

System Error Codes
Service Programming Error Codes
Strata CIX/CTX Telephone Button Programming 11/04
2-23
Sy
stem
Er
ro
r
C
odes
516
32 FB02
A character that is not permitted is used in the Speed Dial
number.
50
FB01
The allowable number of Speed Dial Bins has been
exceeded.
51 FB00
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
52 FB00 The entered value conflicts with an existing numbering plan.
80 FB00 The entered PrimeDN does not exist.
98 FB00 The allowable Short-dial number has been exceeded.
517
18 FB01 Multiple Calling Pilot DN is not assigned.
48 FB01 Cannot delete Multiple Calling Pilot DN.
51 FB01
The Multiple Calling Pilot DN entered is using in a part of the
numbering plan, extension number, etc.
52 FB01 The Multiple Calling DN entered is an already existing DN .
52 FB01 The Multiple Calling Pilot DN entered already exists.
518
32
FB02
ISDN station cannot be assigned to the destination number.
52 FB02 Cannot delete Multiple Calling Pilot DN.
49 FB02
The Multiple Calling Pilot DN entered is using in a part of the
numbering plan, extension number, etc.
52 FB02
The plural trunk access number can not assign in the same
Multiple Calling Group.
80
Cannot assign the destination number because the Multiple
Calling Group does not exist.
48 FB02
The destination type and the destination number must be
assigned at the same time.
82 FB00 The Multiple Calling Group entered is out of the range.
519
33 FB00 The Multiple Calling Group entered is out of the range.
80 - The Multiple Calling Group entered does not exist.
520 - - No error occurs for this Program except for common errors.
521
51 FB00
The Route Plan Number must be complete to be registered to
the Route Plan Table.
98 -
The allowable number of participants in the Route Plan Table
has been exceeded.
522
51 FB00
The Exception Route Plan Number must be complete to be
registered to the Route Plan Table.
98 -
The allowable number of participants in the Route Plan Table
has been exceeded.
523 - - No error occurs for this Program except for common errors.
524 - - No error occurs for this Program except for common errors.
Program Code Occurred FB
Sub-
parameter
Error Descriptions