Toshiba STRATA CIX User Manual
Page 34
Telephone Button Programming
200 Series Programs
1-30
Strata CIX/CTX Telephone Button Programming 11/04
200-23
Travelling COS
Change
FB23
, n,
Hold
n =
1.
Enable
2.
Disable
Privilege to change the Travelling Class of Service Override Code.
200-24
TGAC Override
FB24
, n,
Hold
n =
1.
Enable
2.
Disable
Trunk Group Access Code Over Ride (for Attendant console) (Not
available in R1).
200-25
Service Tones
FB25
, n,
Hold
n =
1.
Enable
2.
Disable
Disable Services Tone for Data Privacy. Service tone, such a Call
Waiting Tone, should be disabled for modems, FAXes, and similar
devices.
200-26
Call Waiting and ROB
Tone
FB26
, n,
Hold
n =
1.
Enable
2.
Disable
Enable/Disable the station to receive Call Waiting (Campon) and Ring
Over Busy Tone. CW tone is always two beeps. ROB tone can be two
beeps or continuous as set in PRG 204, 27.
200-27
Name Display
FB27
, n,
Hold
n =
1.
Enable
2.
Disable
Privilege to put the user name in the list display of Large LCD
(Directory Assistance)
200-28
Door Ovr DND
FB28
, n,
Hold
n =
1.
Override
2.
Do not Override
Enable DND override by door phone.
200-29
Emergency Ringdown
FB29
, n,
Hold
n =
1.
Enable
2.
Disable
Enable Emergency ringdown.
200-30
Change System
Speed Dial
FB30
, n,
Hold
n =
1.
Enable
2.
Disable
Privilege to use System Speed Dial.
200-31
Network COS
FB31
, n,
Hold
n =
1~32
Network COS number.
200-32
Auto OCA
FB32
, n,
Hold
n =
1.
Enable
2.
Disable
OCA occurs automatically when making a call to a busy station that
allows OCA calls to be received.
200-33
Originate OCA
FB33
, n,
Hold
n =
1.
Enable
2.
Disable
The privilege to make OCA calls to other stations.
200-34
RSTU Supervision
FB34
, n,
Hold
n =
1.
Received
2.
Not Received
Devices connected to RSTU circuits that do not automatically hang
up, and connect to CO lines that do not provide disconnect
supervision, should be set with ìNot Received.î This enables the auto
disconnect Tandem timer in PRG 104, PB06 for these types of
Connections.
200-35
Station Speed Dial
Bins
FB35
, n,
Hold
n =
0~100
The number of station speed dial bins allocated to this station
(maximum=100 per station).
200-39
CO Park & Hold
FB39
, n,
Hold
n =
1.
Enable
2.
Disable
Enabled: When this station parks a line call, CO or GCO buttons of
the parked line that appear on other stations will be on hold. This will
allow the other stations to press the CO or GCO button to pickup the
parked call.
Disabled: When this station parks a line call, CO or GCO buttons of
the parked line that appear on other stations will appear busy. This
will prevent the other stations to press the CO or GCO button to
pickup the parked call.
200-40
Stutter Dial Tone
FB40
, n,
Hold
n =
1.
Enable
2.
Disable
This feature is available only with CTX Release 1.3 or higher software
and with CTX WinAdmin Release 1.3 or higher software.
Enable: This station will receive stuttered dial tone when it has a
station-to-station or Voice Mail message waiting, or if DND is set. This
feature is available with Strata CTX R1.3 software.
Disable: This station will receive normal dial tone when it has a
station-to-station or Voice Mail message waiting, or if DND is set.
Table 1-14
Programs 200~202
(continued)
Button
Sequence
Value(s)
Summary