Toshiba STRATA CIX User Manual
Page 113
Telephone Button Programming
900 Series Programs
Strata CIX/CTX Telephone Button Programming 11/04
1-109
T
e
le
phon
e Butt
on
Pr
og
ramm
ing
Program Number(s): 912
Prerequisite Program:
Format SmartMedia Card
Reference:
None
Access Sequence:
Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱.
At the
PASSWORD=
prompt, Enter your password and press
Hold.
At the
PROG=
prompt enter
912 and press Hold.
At the
CABINET=
prompt enter the Shelf number.
Note
The Shelf number is entered in ìXXî format where Shelf is a two digit value from 01~07
corresponding to the Strata CTX Cabinet number. See ì
î below for a
description of the LED display.
1. Press
FB01
~
FB10
to enter your Make Busy selection for the appropriate Slot in the Cabinet entered in
Access Sequence above.
Note
The slot to which your programming phone is connected can not be set to Make Busy.
2. Press
Hold
to execute.
3. Press
Hold
again to return to
CABINET=
prompt.
4. Press
# # Hold
to return to the
PROG=
prompt.
5. Enter another program number to continue programming or press
# # Hold
again to exit programming
mode.
Program Button LEDs
The LED blink pattern indicates the following:
•
Red continuous blinking – PCB experienced a Make Busy status error.
•
Red continuous illumination – PCB Make Busy Status mode is on.
•
Green continuous blinking – PCB Make Busy Status mode is stand by.
•
Green intermittent blinking – PCB Make Busy Status mode is idle.
FB Name
FB
Summary
Value
Equipment
00
Enter Cabinet Number
01~07 (value=xx)
Slot #1
01
Enter
1
or
2
1: Set make busy
2: Clear make busy
Slot #2
02
Slot #3
03
Slot #4
04
Slot #5
05
Slot #6
06
Slot #7
07
Slot #8
08
Slot #9
09
Slot #10
10