Program update, Make busy control, Program update -108 make busy control -108 – Toshiba STRATA CIX User Manual
Page 112
Telephone Button Programming
900 Series Programs
1-108
Strata CIX/CTX Telephone Button Programming 11/04
Program Update
This program enables you to update the Strata CTX programs.
Program Number(s): 911
Prerequisite Program:
Format SmartMedia Card
Reference:
None
Access Sequence:
Login to programming mode from your telephone button pad:
Hold ✱#✱#1✱2✱3✱.
At the
PASSWORD=
prompt, Enter your password and press
Hold.
At the
PROG=
prompt enter
911 and press Hold.
Note
Before running this program, make sure the SmartMedia card is properly formatted. See
for more details.
1. Press
FB01
to enter your Backup choice. Press the
Scroll
or
Page
button to view your selection
options.
2. Press
1
.
FB01
and
FB04
should blink green.
3. Press
Hold
to execute. Press
Hold
again to Cancel. This program stops running if you exit
programming mode from your telephone.
Make Busy Control
When an error occurs in hardware resources used for a station or a line fails, this feature makes them
busy. The station or line PCB can be disabled temporarily to perform maintenance or parts replacements
as well. This program is only available in the telephone button programming mode.
FB Name
FB
Summary
Value
LCD Prompt
Update Function
01
Enter 1 or 2 to identify the type of Update
intended.
Select 3 to cancel a running update.
1:Update
2:Reboot
3:Cancel
1:Update
2:Reboot
3:Cancel
Total Blocks
02
View total blocks to be updated (total blocks
will vary depending on software versions).
0~65536 (CTX670)
0~128 (CTX100)
default = 0
n/a
Copied Blocks
03
View number of blocks copied.
0~65536 (CTX670)
0~128 (CTX100)
default = 0
n/a
Active Side Status
04
Backup Type Display
1:Normal
2:Trial
3:Fault
4:Donít Care
5:Error
1:Normal
2:Trial
3:Fault
4:Donít Care
5:Error
Stand by Side Status
05
Stand by Backup Type
1:Normal
2:Trial
3:Fault
4:Donít Care
5:Error
1:Normal
2:Trial
3:Fault
4:Donít Care
5:Error
Active Side Number
06
Active Side Number.
0 or 1
default = 0
ACT SIDE=
Status
07
View Backup Status.
1:Idle
2:Running
3:Success
4:Error
1:Idle
2:Running
3:Success
4:Error