Toshiba STRATA CIX User Manual
Page 62
Telephone Button Programming
300 Series Programs
1-58
Strata CIX/CTX Telephone Button Programming 11/04
304-19
Intercept
FB19
, n,
Hold
n =
1.
Enable
2.
Disable
(default)
Enable Intercept. A call is transferred to a special destination called
intercept position when the destination of a trunk line call is not
determined with DID, DIT or DISA. Intercept is also activated when
the destination is determined, but the call cannot be terminated due to
a defect or an incorrect number. If the system has a simplified
attendant console, the attendant console is usually specified to
terminate the call. This function ensures termination of a trunk line
call.
304-20
Send Dial Tone
FB20
, n,
Hold
n =
1.
Enable
2.
Disable
(default)
Enable Send Dial Tone.
304-21
TGAC Override
FB21
, n,
Hold
n =
1.
Enable
2.
Disable
(default)
Enable Trunk Group Access Code (TGAC) override.
304-22
Network COS
FB22
, n,
Hold
n =
1~32
(default = 1)
Enter the Network COS number.
304-23
LCR Group
FB23
, n,
Hold
n =
1~16
(default = 1)
Enter the LCR Group number. Calls from this ILG cannot tandem if
this field is not entered.
304-24
Change COS
Override Code
FB24
, n,
Hold
n =
1.
Enable
2.
Disable (default)
Enable authority to change COS Override Code.
304-25
Register Speed Dial
Codes
FB25
, n,
Hold
n =
1.
Enable
2.
Disable (default)
Enable authority to create system speed dial codes.
304-26
Originator Invoke
OCA
FB26
, n,
Hold
n =
1.
Enable
2.
Disable (default)
Enable authority for the originator of a call to invoke OCA when
encountering a busy station.
304-27
Senderized Tone
Mode
FB27
, n,
Hold
n =
1.
Dial Tone (default)
2.
Entry Tone
3.
Silence
Send DTMF tones as a complete number rather than digit-by digit.
304-28
Emergency Call
Group
FB27
, n,
Hold
,
Hold
n =
1~8
(default = 1)
Used to enable E911 calling across a QSIG network. The QSIG ILG
is assigned to an Emergency Call Group in the same way a station is
in Program 200 FB17. Without this assignment, the call will not
attempt to complete to one of the trunks in the Emergency Group and
will result in an abandoned call. See Program 550
304-29
Tenant Number
FB29
, n,
Hold
,
Hold
n =
1~8 (default = 1)
Enter the Tenant number to which this DID should be assigned.
305
ILG Delete
305
,
Hold
This command deletes Incoming Line Groups.
305-00
ILG Number
n,
Hold
,
Hold
n =
1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
Enter the ILG number to delete.
306
Outgoing Line Group
Assignment
306
,
Hold
OLG is a line selection feature which enables the use of external trunk
or private line groups for outgoing service. Assign and configure up to
128 OLGs (the same line can be placed in an OLG and an ILG).
306-00
Group Number
n,
Hold
n =
1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.)
Enter the OLG Group number.
306-01
Group Type
FB01
, n,
Hold
n =
1.
Analog (default)
2.
ISDN
Select the OLG Type.
306-02
Trunk Type
FB02
, n,
Hold
n =
1.
CO (default)
2.
Tie
Select the Trunk Type.
Table 1-28
Programs 303~315
(continued)
Button
Sequence
Value(s)
Summary