Telephone button commands, Telephone button commands -3 – Toshiba STRATA CIX User Manual
Page 7
Telephone Button Programming
Telephone Button Overview
Strata CIX/CTX Telephone Button Programming 11/04
1-3
T
e
le
phon
e Butt
on
Pr
og
ramm
ing
Telephone Button Commands
1. Use the following buttons to execute the commands:
•
Hold
ñ Enter.
•
Page
/
Scroll
ñ Scroll up or down.
•
Spkr
ñ This delimiter moves cursors between sub-parameter values.
•
Vol
▲
ñ Escape.
Vol
▲
displays as
&
on the LCD. Press
Vol
▲
to program
#
or
*
in dialing
sequences.
•
Vol
▼
ñ Back space for line editing.
•
# # Hold
ñ Cancel.
•
*
ñ Use this button between values to specify a range of objects to be programmed (e.g.,
1001*1005 enables programming of stations 1001 through 1005).
•
**
ñ Use this button between values to specify a set of objects to be programmed (e.g.,
1001**1005**1012 enables programming of stations 1001, 1005 and 1012).
•
Off-hook ñ lift and replace the handset to immediately exit programming mode.
2. Keep the following in mind as you maneuver through Strata CTX programs.
•
Default and/or current settings are displayed on the telephone LCD with an asterisk.
•
Some Strata CTX Programs have more than 20 programmable parameters. To toggle from
parameters
FB01
~
FB20
and
FB21
~
FB40
press the
Scroll
or
Page
button after entering Program
Mode.
•
To view parameter options on your telephone LCD, press the desired
FB
button and press the
Scroll
or
Page
button.
•
Each parameter shows a number to the left (e.g.,
2:DISABLE
). Program the desired parameter by
pressing the number button (in this example
2
) that corresponds to your desired parameter.
•
To enter data, use the number keys.
•
To submit your program entry press
Hold
. To confirm a submitted entry, press
Hold
again.
•
To exit a program press
# # Hold
.
•
To enter the
#
character in your data string press the
Vol▲
and the
#
button simultaneously. An
&
sign appears in your LCD. Press the
#
button, then enter the remaining data.
•
If you get an error code, press
Hold
(twice) to continue programming. See
Programming Parameters
Programs can have between one and 40 programmable parameters, each represented by the
FBnn
buttons. The LEDs light up for each
FBnn
button that features a programmable parameter. Each
parameter is programmed by entering values into the LCD from the telephone button pad.
1. At the SELECT PARAM prompt, press the appropriate
FBnn
button.
2. Enter the appropriate value from the telephone button pad using the Parameter Fields tables supplied
with each program.
3. Press
Hold
to submit.
4. Press another
FBnn
button to program more parameters
… or press
Hold
again to program.
Programming Sub-parameters
Some commands enable programming of Sub-parameters to further refine Strata CTX settings. Internet or
Network IP addresses are entered using sub-parameter data. IP addresses are displayed as four three-
digit values, or Octets, separated by ìperiodsî (e.g.,
192.168.255.253
). Your programming telephoneís
LCD is only capable of displaying the IP information three digits, or one Octet, at a time.