Omron Programmable Terminals NT31 NT31C - Manual (Page 280)

Appendix I Relationship between System Program and Hardware
276
Combining a -V1 Version and -V2 Version
Hardware
NT31-ST121 j-EV1
NT31C-ST141 j-EV1
NT31-ST121 j-EV2
NT31C-ST141 j-EV2
System program Ver. 2.0 j or Ver. 2.1j The following functions (new functions supported by the -V2) cannot be used:
S Additional data areas accessible in CS1-series PCs
S The CS1-series high-speed 1:N NT Link
S Interlock function that controls touch switches, numeral inputs, and character string inputs
S Mathematical function
S Device Monitor function
S NT30/620 compatible mode
S Expanded capabilities for label (guide character) displays, including multiple lines of text, ON/OFF switching
displays, numeral memory table displays, and character string memory table displays
System program Ver. 3.0 j All of the functions described in the Setup Manual and Reference Manual can be used.
* The system program’s version can be checked from the System Menu.
Combining a -V2 Version and Version without a -V
j Suffix
Hardware
NT31-ST121 j-E
NT31C-ST141 j-E
NT31-ST121 j-EV2
NT31C-ST141 j-EV2
System program Ver. 1.0 j The following functions cannot be used
S Analogue meter
S High-definition font display
S Installation of system programs using memory unit
S Connection to Mitsubishi PLCs
S Memory link
S Window control from the host
S Multiple display of window screens
S Moving a window
S Additional data areas accessible in CS1-series PCs
S The CS1-series high-speed 1:N NT Link
S Interlock function that controls touch switches,
numeral inputs, and character string inputs
S Mathematical function
S Device Monitor function
S NT30/620 compatible mode
S Expanded capabilities for label (guide character)
displays, including multiple lines of text, ON/OFF
switching displays, numeral memory table displays,
and character string memory table displays
The following functions cannot be used
S Analogue meter
S High-definition font display
S Connection to Mitsubishi PLCs
S Memory link
S Window control from the host
S Multiple display of window screens
S Moving a window
S Additional data areas accessible in CS1-series PCs
S The CS1-series high-speed 1:N NT Link
S Interlock function that controls touch switches,
numeral inputs, and character string inputs
S Mathematical function
S Device Monitor function
S NT30/620 compatible mode
S Expanded capabilities for label (guide character)
displays, including multiple lines of text, ON/OFF
switching displays, numeral memory table displays,
and character string memory table displays
* Installation of system programs using memory unit
is possible
System program Ver. 3.0 j The following functions cannot be used
S Installation of system programs using memory unit
S High-definition font display All of the functions described in the Setup Manual and
Reference Manual can be used.
* The system program’s version can be checked from the System Menu.