Omron Programmable Terminals NT31 NT31C - Manual (Page 240)

6-14 Section Version Display
230
6-14 Version Display
Use the Version Display function to check the version of the NT31/NT31C’s sys-
tem program. The Version Display screen shows the model, creation date, and
version of the system program installed in the NT31/31C.
6-14-1 Method of Use
The Version Display screen is displayed by operating the system menu as de-
scribed below.
Select Expansion Mode.
Select Version Display.
The system program’s version information will be
displayed as described below. Press the Quit
touch switch to exit the Version Display screen
and return to the Expansion Mode screen.
• PT Model: PT model number
• System program: System program name
• Version
System program version
• Date Date program was created.
This screen is an example. Actual screens will
show the information specific to the PT and sys-
tem program being used.
Ver 3.10
After checking the version information, press the Quit touch switch to exit the
Version Display screen and return to the Expansion Mode screen.
Reference: S The PT model always shows the model number of the ivory model of the PT.
The B suffix will not be displayed, even for black models.
S The system program’s version number is also displayed in the upper-right cor-
ner of the System Menu.
S The creation date does not always match the file date of the system program
installed with the System Installer.