Omron Programmable Terminals NT31 NT31C - Manual (Page 108)

5-1 Section Connecting to the Host’s RS-232C Port
97
CS1H-CPU67-E(V1)
CQM1H-CPU51 CQM1H-CPU61
C200HE-CPU32-(Z)E C200HE-CPU42-(Z)E
C200HG-CPU33-(Z)E C200HG-CPU43-(Z)E
C200HG-CPU53-(Z)E C200HG-CPU63-(Z)E
C200HX-CPU34-(Z)E C200HX-CPU44-(Z)E
C200HX-CPU54-(Z)E C200HX-CPU64-(Z)E
C200HX-CPU65-ZE C200HX-CPU85-ZE
Usable Cables with Attached Connectors:
• For host link, 1:1 NT Link, or 1:N NT Link (+5 V power supplied from PC)
XW2Z-070T-1 (9-pin to 9-pin, 0.7 m)
XW2Z-200T-1 (9-pin to 9-pin, 2 m)
SJ46006-102 (9-pin to 9-pin, 1 m)
SSJ46006-202 (9-pin to 9-pin, 2 m)
6
5 9
1 6
5 9
1
Shielding wire Abbreviation
FG
−
SD
RD
RS
CS
+5V
−
−
SG
Pin number
Connector
hood
1
2
3
4
5
6
7
8
9
(9-pin type)
NT-AL001 side PC side
RS-232C
connector
RS-232C
connector
Pin number
Connector
hood
1
2
3
4
5
6
7
8
9
Abbreviation
FG
−
SD
RD
RS
CS
+5V
−
−
SG
(9-pin type)
Since the CS1G/H, CQM1H, and C200HX/HG/HE(-Z)E have a +5 V output,
no external power supply is required for the NT-AL001.
5-1-4 Recommended Connectors, Cables, and Crimp Terminals
Connectors and Cables Recommended for RS-232C
When making an RS-232C connecting cable, as far as possible use the recom-
mended parts indicated in the table below. Some units come supplied with one
connector and connector hood.
Check the required parts and prepare them in advance.
Name Model Remarks Delivered with
XM2A-0901
9-pin type
Made by OMRON
CS1-series CS1G/H
C-series CQM1, C200HS,
C200HX/HG/HE(-Z)E
CVM1/CV-series CPUs
CV500-LK201
Connector
XM2A-2501
25-pin type
Made by OMRON
C500-LK203
3G2A5-LK201-EV1
C200H-LK201-V1
DB-25P
25-pin type
Made by JAE
3G2A5-LK201-EV1
3G2A6-LK201-EV1