Omron Programmable Terminals NT31 NT31C - Manual (Page 232)

6-12 Section Programming Console Function
222
Commu-
nication
Method
Commu-
nication
Type
Applicable PCs Connected Port
NT Link
(1:1)
RS-232C
C200HE-CPU42-(Z)E (*1)
C200HG-CPU43-(Z)E (*1)
C200HG-CPU63-(Z)E (*1)
C200HX-CPU44-(Z)E (*1)
C200HX-CPU64-(Z)E (*1)
C200HX-CPU65-ZE (*1)
C200HX-CPU85-ZE (*1)
CPM2A-30CD jj-j (*1)
CPM2A-40CD jj-j (*1)
CPM2A-60CD
jj-j (*1)
CPM2C-10 jjjjjj-j (*2)
CPM2C-20 jjjjjj-j (*2)
CQM1-CPU4
j-EV1 (*1)
CQM1H-CPU21 (*1)
CQM1H-CPU51 (*1)
CQM1H-CPU61 (*1)
SRM1-C02-V2
CPU built-in RS-232C
port
CPM1-10CDR- j
CPM1-20CDR-
j
CPM1A-10CD j-j
CPM1A-20CD j-j
CPM1A-30CD
j-j
CPM1A-40CD j-j
Peripheral port (*3)
NT Link
(1:N)
CS1G-CPU42-E(V1) (*1)
CS1G-CPU43-E(V1) (*1)
CS1G-CPU44-E(V1) (*1)
CS1G-CPU45-E(V1) (*1)
CS1H-CPU63-E(V1) (*1)
CS1H-CPU64-E(V1) (*1)
CS1H-CPU65-E(V1) (*1)
CS1H-CPU66-E(V1) (*1)
CS1H-CPU67-E(V1) (*1)
S
CPU built-in
RS-232C port
S
Peripheral port (*4)
*1: The peripheral port Programming Console always has priority. If a Programming
Console is connected later, the Programming Console function of the
NT31/NT31C is invalidated and operation from the NT31/NT31C becomes
impossible.
*2: The CPM2C-CN111 Connecting Cable splits the PC’s Communication Port into a
RS-232C port and a peripheral port.
*3: An RS-232C cable cannot be connected to the peripheral port. An RS-232C
adapter (CPM1-CIF01) is required.
*4: The RS-232C cable cannot be directly connected to the peripheral port. An
RS-232C converting cable (CS1W-CN118) is required.
Reference: Note that the Programming Console function cannot be used with CPM1, CQM1,
and C200HX/HG/HE PCs of the following lot numbers.
CPM1:
jjj5, jj*6
where * is a number in the range 1 to 9 or the letter X or Y.
CQM1: jjj3, jjj4, jjj5, jj*6
where * is a number in the range 1 to 9 or the letter X or Y.
C200HX/HG/HE: jjj5 jj*6
where * is a number in the range 1 to 9 or the letter X or Y.