Omron Programmable Terminals NT31 NT31C - Manual (Page 260)

Appendix A Specifications
250
Item Specifications
Screen print function
Functions: - Prints a hard copy of the screen display
- Prints display/alarm histories
Setting: Set the printing protocol (“Print Controller”) and printing type (“Print
Method”) in the memory switch menu.
“ESC/P”, “Color”: Color printing conforming to ESC/P 24-J83C
“PC-PR201H”, “Color”: Color printing conforming to PC-PR201PL
“ESC/P”, “Tone”: Monochrome printing in 8 grayscale levels,
conforming to ESC/P 24-J82
“PC-PR201H”, “Tone”: Monochrome printing in 8 grayscale levels,
conforming to PC-PR201PL
“PCL 5”, “Tone”: Monochrome printing in 8 grayscale levels,
conforming to PCL 5
However, the NT31 supports monochrome printing only.
Calendar and clock function
- Displays the current time in accordance with the built-in clock
- Displayed and set with “Calendar Check” in the “MAINTENANCE MODE” menu
Programming Console function
Executes functions equivalent to those of al C200H-PRO27-E Programming Console
for CPM1, CPM1A, CPM2A, CPM2C, CQM1 (-EV1 only), CQM1H,
C200HX/HG/HE(-Z)E, and SRM1 (C02-V2 only) PCs.
Executes functions as a Programming Console for CS1 series PLC.
Device Monitor function The Device Monitor function can be used to change the PC’s operating mode,
read/change words in the PC’s data areas, and display the PC’s error log.
Compatible PCs include the CPM1, CPM1A, CPM2A, CPM2C, CQM1, CQM1H,
C200HX/HG/HE(-Z)E, SRM1, and CS1-series PCs.
Mathematical function Up to 256 calculation expressions can be registered along with the screen data. The
calculation function reads the required data from numeral memory tables or host
words, executes the registered calculations, and writes the results.
Arithmetic operators, logic operators, bit operators, and comparative operators can
be used.
System program
transmission Downloads the system program from the system installer
Downloads/Upload the system program with a memory unit.
Transmission
functions Screen data
transmission
- Function for downloading screen data to and uploading screen data from the
Support Tool
- Function for transmitting screen data to and from the memory unit.
History data
uploading
Function for uploading display/alarm history data from PT.