Omron Programmable Terminals NT31 NT31C - Manual (Page 149)

6-3 Section Operation Modes and the System Menu
139
NT31/NT31C, while pressing the touch switch at the top left corner of the touch
panel (size: 7.2 mm
7.2 mm).
POWER
RUN
Switch the power to the NT31/NT31C ON while pressing this touch switch.
The menu items in the System Menu are displayed on the NT31/NT31C screen
as touch switches. Menu items can be selected simply by pressing them.
Example: Displaying the MAINTENANCE MODE MENU screen by pressing
Maintenance Mode in the System Menu.
Press Maintenance Mode.
Ver 3.10
Return to the RUN mode by selecting Quit in the System Menu and other menus.
Reference: Unlike previous PT models, the NT31/NT31C does not return to the RUN mode
automatically if no operations are performed.
Selecting Menu Items
Switching from the
System Menu to the RUN
Mode