Omron Programmable Terminals NT31 NT31C - Manual (Page 146)

6-3 Section Operation Modes and the System Menu
136
The items displayed in the system menu and their functions are as follows.
Menu Item Function
Quit Clear the System Menu screen and return to the RUN mode
screen.
Transmit Mode Display the Transmit Mode screen to allow transmission for
screen data between the Support Tool and the NT31/NT31C.
For details on transmission of screen data, refer to 6-6 Trans-
mitting the Screen Data (page 155).
Maintenance Mode Display the Maintenance Mode menu to allow system mainte-
nance of the NT31/NT31C, and various NT31/NT31C settings.
Expansion Mode Display the Expansion Mode menu to allow selection of the
expansion functions supported by the NT31/NT31C. The fol-
lowing expansion functions are supported:
• Version Display
Displays the version of system program, the date it was
created, and the PT model. For details, refer to 6-14 Version
Display.
• Programming Console Function
Allows the NT31/NT31C to be used as a Programming Console
for a CS1G/CS1H, CPM1, CPM2A, CPM2C, CQM1, CQM1H,
C200HX/HG/HE(-Z), or SRM1.
For details, refer to 6-12 Programming Console Function.
• Device Monitor Function
Allows the NT31/NT31C to change the PC’s operating mode
and display/change the contents of words in a CS1G/CS1H,
CPM1, CPM2A, CPM2C, CQM1, CQM1H, C200HX/HG/
HE(-Z), or SRM1. For details, refer to 6-13 Device Monitor
Function in this manual or 2-16 Device Monitor Function in the
Reference Manual.
The following functions can be executed in the System Installer mode.
• Setting the display language
• Clearing and installing system programs
• Disabling/enabling display of the System Menu.
• Disabling/enabling writing to the screen data memory
• Clearing screen data
For details on these functions, refer to 6-5 Operations in the System Installer
Mode (page 150).
Items in the System
Menu
Functions of the System
Installer Mode