Omron Programmable Terminals NT31 NT31C - Manual (Page 186)

6-9 Section System Settings
176
Set the screen saver operation by following the menu operation from the System
Menu shown below.
Select Maintenance Mode.
Select Memory Switch.
Press [ ↓] (next screen) or [↑] (previous
screen) to display the second memory
switch setting screen.
Press Screen Saver Movement to display
Display or Display erased.
The setting option changes each time the
touch switch is pressed.
Ver 3.10
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
• To confirm the settings and quit the memory switch setting screen, press the
Quit touch switch. The settings made last will be set and the NT31/NT31C will
return to the MAINTENANCE MODE MENU screen.
• To quit the memory switch setting screen without confirming the settings, press
the Abort touch switch. The NT31/NT31C will return to the MAINTENANCE
MODE MENU screen with the previous settings still in effect.