Omron Programmable Terminals NT31 NT31C - Manual (Page 277)

271
Appendix G
Making the Cable for Connection to a Bar
Code Reader
Refer to the following when making the cable for connection to a bar code reader.
Wiring Method
Bar code reader side
Abbr. Pin No.
1
SD 2
RD 3
RS 4
CS 5
+5 V 6
7
8
SG 9
NT31/NT31C side
RS-232C
interface
Abbr.
SD
RD
RS
CS
ER
SG
+5 V
When using the +5 V output of the NT31/NT31C, limit the cable length to within 2 m. If a cable longer than 2 m is
used, connect an external power supply to the bar code reader.
Connector and Related Parts
Use the parts which are specified by bar code reader and following recommended products when making the
connecting cable.
Name Model Remarks
Connector XM2A-0901 9-pin type, made by OMRON, PT side
Connector hood XM2S-0911 9-pin, made by OMRON
Cable AWG28
5P IFVV-SB
Multi-core shielded cable, made by Fujikura Ltd.
CA-MA-VV-SB 5P
28AWG
Multi-core shielded cable, made by Hitachi Cable, Ltd.