Omron Programmable Terminals NT31 NT31C - Manual (Page 20)

1-2 Section Functions of the NT31/NT31C
8
Item NT31/NT31C NT30/NT30C
Recipe function None Possible
Accessible CS1 PC data areas --- The data areas listed below can be
accessed in addition to the data areas
accessible with the NT30/NT30C.
*5
- EM banks (EM_0 to EM_C)
- Timer completion flags (TU)
- Counter completion flags (CU)
- Work areas (WR)
- Task flags (TK)
- HR area
*1: These functions are available only in V2 versions of the NT31/NT31C.
*2: This is the capacity of the flash memory that stores screen data.
*3: The values are the same as the NT30/NT30C when the PT is in NT30/620 compatible mode.
*4: The window control area can be used only in the V
j versions of the NT31/NT31C.
For differences in programming, refer to Appendix B in the NT31/NT31C/NT631/NT631C Programmable Terminal Refer-
ence Manual.