Omron W343-E1-07 User Manual

Operation manual, Ethernet units

OPERATION MANUAL

Cat. No. W343-E1-07

CS1W-ETN01 (10Base-5)
CS1W-ETN11 (10Base-T)
CJ1W-ETN11 (10Base-T)

Ethernet Units

SYSMAC
CS/CJ Series

This manual is related to the following products:

CS1W-ETN01 CS/CJ Series CS1W-ETN11 CJ1W-ETN11

Table of contents

Document Outline

CS1W-ETN01 (10Base-5) CS1W-ETN11 (10Base-T) CJ1W-ETN11 (10Base-T) Ethernet Units
Notice:
About this Manual:
Warranty
PRECAUTIONS
- 1 Intended Audience
- 2 General Precautions
- 3 Safety Precautions
- 4 Operating Environment Precautions
- 5 Application Precautions
- 6 Conformance to EC Directives
  - 6-1 Applicable Directives
  - 6-2 Concepts
SECTION 1 Features and System Configuration
- 1-1 Features
- 1-2 System Configuration
  - 1-2-1 Device Configuration
  - 1-2-2 Node Connections
- 1-3 Devices Required in a Network
  - 1-3-1 10Base-5 Ethernet Unit
  - 1-3-2 10Base-T Ethernet Unit
- 1-4 Related Programming Devices
- 1-5 Specifications
- 1-6 Software Configuration
- 1-7 IP Addresses
- 1-8 Precautions
  - 1-8-1 Installation
  - 1-8-2 Ethernet and IEEE802.3 Standards
SECTION 2 Communications Functions
- 2-1 Communications Functions
- 2-2 FINS Communications
- 2-3 Socket Services
- 2-4 FTP Server
- 2-5 Mail
SECTION 3 Installation and Initial Setup
- 3-1 Before Operation
  - 3-1-1 Automatic Address Generation
  - 3-1-2 IP Address Table
- 3-2 Overview of Startup Procedure
- 3-3 Unit Components
  - 3-3-1 Nomenclature
  - 3-3-2 Indicators
- 3-4 Switch Settings
  - 3-4-1 CS-series Ethernet Units
  - 3-4-2 CJ-series Ethernet Units
- 3-5 Mounting to a PC
  - 3-5-1 Mounting to a CS-series PC
  - 3-5-2 Mounting to a CJ-series PC
- 3-6 Connecting to the Network
- 3-7 Creating an I/O Table
- 3-8 Creating Routing Tables
  - 3-8-1 Routing Table Overview
  - 3-8-2 Connecting and Using a Peripheral Device for the PC
- 3-9 System Setup
- 3-10 Creating an IP Address Table
- 3-11 Creating an IP Router Table
- 3-12 Checking Communications
SECTION 4 System Setup and Memory Allocations
- 4-1 Allocated Words
- 4-2 CPU Bus Unit System Setup
  - 4-2-1 Settings
  - 4-2-2 Mail Settings
- 4-3 CIO Area Allocations
- 4-4 DM Area Allocations
SECTION 5 FINS Communications
- 5-1 Overview of FINS Communications
  - 5-1-1 Communications On an Ethernet Network
  - 5-1-2 FINS Communications Service Features
- 5-2 Procedure Before Using FINS Communications
- 5-3 Sending Commands From a PC
- 5-4 Sending Commands From a Host Computer
- 5-5 FINS Server
SECTION 6 Socket Services
- 6-1 Overview
- 6-2 Using Socket Services with Socket Service Request Switches
- 6-3 Using Socket Services with CMND(490)
SECTION 7 FTP Server
- 7-1 Overview
- 7-2 Setting Login Names and Passwords
- 7-3 Using File Memory
- 7-4 FTP Server Application Example
- 7-5 Using FTP Commands
- 7-6 UNIX Application Example
SECTION 8 Mail
- 8-1 Overview of Mail Function
- 8-2 Sending Mail
- 8-3 Mail Example
SECTION 9 Testing Communications
- 9-1 Communications Testing Functions
- 9-2 PING Command
  - 9-2-1 Ethernet Unit
  - 9-2-2 Host Computer
- 9-3 Internode Test
  - 9-3-1 Running the Test
  - 9-3-2 Checking Results
SECTION 10 Troubleshooting
- 10-1 Troubleshooting with Indicators
- 10-2 Error Status
- 10-3 Error Log
- 10-4 Error Log Error Codes
- 10-5 Troubleshooting Procedures
- 10-6 Troubleshooting with Response Codes
- 10-7 Results Storage Area Response Codes
SECTION 11 FINS Commands Addressed to Ethernet Units
- 11-1 Command Codes and Response Codes
  - 11-1-1 Command Code List
  - 11-1-2 Response Code List
- 11-2 Socket Applications
  - 11-2-1 Format
  - 11-2-2 PC Memory Areas
- 11-3 Command/Response Reference
Appendix A Network Installation
Appendix B Ethernet Network Parameters
Appendix C Buffer Configuration
Appendix D TCP Status Transitions
Appendix E Auxiliary Area Data
Appendix F CPU Bus Unit Allocations in the CPU Unit
Appendix G ASCII Characters
Appendix H Dimensions
Appendix I Maintenance
Appendix J Inspections
Index
Revision History