Omron Programmable Terminals NT31 NT31C - Manual (Page 236)

6-12 Section Programming Console Function
226
Standard Programming Console Key Sheet
Programming Console Key Sheet for CS1 Series
Differences with Respect to Programming Consoles
• Programs cannot be stored (recorded) or read (replayed). If it is necessary to
store or read a program, use a Programming Device.
• It is not possible to adjust the volume of the key press sound. Whether or not
the key press sound sounds is determined by the setting for the Key Press
Sound memory switch of the NT31/NT31C. It sounds when the setting is ON
and does not when the setting is OFF (page 170).
• If an error occurs when using the Programming Console function, an error
screen is displayed. Whether or not the buzzer sounds at this time is deter-
mined by the setting for the Buzzer Sound memory switch of the NT31/NT31C
(page 171).
Reference: A communications error will occur if you use the Programming Console function
to change the communications settings (in the PC’s PC Setup) that govern the
port to which the NT31/NT31C is connected. In this case, the Programming Con-
sole function will be unusable.