Selecting a sample, 97 basic operation of the varios – Roland maxWerk Musical Instrument User Manual

Page 97

Basic operation of the VariOS

Selecting a sample

* When the VariOS has just been powered up, it is not ready to produce sound. You must load samples into

its internal memory. Before you continue with the following procedure, you must use the V-Producer’s
“Load Wave Files” command to send samples to the VariOS (p. 50).

1. Press the

[MENU]

button so it’s not lighted. The sample select screen will appear.

fig.042-004

2. Make sure that the cursor is located at the sample number, and turn the

[VALUE]

knob to select

the desired sample.

fig.042-0042

3. You can press the

[VOLUME]

knob to preview (audition) the selected sample.

* If there is no sample, the display will indicate

“NO WAVE DATA,”

and no sound will be heard.

fig.042-043

4. To select a different part, use the

[CURSOR]

buttons to move the cursor to the part number, and

turn the

[VALUE]

knob to select a part.

fig.042-0044

Sample name

Cursor (underline)

Sample number

Part number

Dark

Cursor (underline)

Sample number

Cursor (underline)