Roland maxWerk Musical Instrument - Manual (Page 23)

23
Installation
5
Click [OK] to close the System Properties dialog box.
6
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
8
Click the Windows start menu, and from the menu, select “Run...” .
Open the “Run...” dialog box.
9
In the dialog box that appears, input the following into the “Open” field,
and click [OK] .
D:\ENGLISH\Driver\USB_XP2K\SETUPINF.EXE
* The drive name “D:” may be different for your system. Specify the drive name of
your CD-ROM drive.
10
The SetupInf dialog box will appear.
You are now ready to install the driver.
◆ Installing the driver
11
Use the USB cable to connect the VariOS to your computer.
fig.02-USB
12
Set the VariOS’s power switch to the ON position.
Near the task bar, your computer will indicate “Found New Hardware” .
Please wait.
After installing the driver,
restore the original setting.
USB cable
VariOS
(Rear)
Computer
USB connector
You must power up the
VariOS according to the
procedure given on p. 43.