Roland maxWerk Musical Instrument - Manual (Page 41)

41
Listening to the demo songs
Loading the demo songs
1
Start up V-Producer.
Before starting up V-Producer, you must power up the VariOS and connect the VariOS to your
computer via a USB cable.
If you inadvertently start up V-Producer before powering up the VariOS or connecting the USB
cable, or if you power down the VariOS or disconnect the USB cable while V-Producer is
running, you must exit V-Producer, and then restart it.
2
In V-Producer, choose Open Song from the File menu. Browse to the [Roland] - [V-Producer]
folder -> Demo Songs folder, and open demo song files (.vpd).
* Loading the samples will require approximately one minute. Please wait until loading is complete.
In some cases when you open a song, a dialog box of “[sample name] Load File
Name” may appear. This will appear if the user has moved a sample file that is used
by the song file, or if V-Producer does not know the location of the sample file. Please
specify the file location of the sample name shown in the dialog box.