Roland maxWerk Musical Instrument - Manual (Page 50)

50
Loading wave files (Load Wave Files)
Here’s how you can load wave files from the hard disk of your computer and send them to the VariOS.
When you execute this command, the Load Wave Files dialog box will appear.
1. Start up V-Producer.
* Before starting up V-Producer, you must power up the VariOS and connect the VariOS to your
computer via a USB cable. If you inadvertently start up V-Producer before powering up the VariOS
or connecting the USB cable, or if you power down the VariOS or disconnect the USB cable while V-
Producer is running, you must exit V-Producer, and then restart it.
2. At the bottom of the screen, click the [Sample Info] button ( ) to access the Sample
List screen. In Sample List, click the [ Load Wave Files] button (or choose File - Load Wave Files
menu).
fig.03-02LoadwavefileButton_50
* V-Producer is able to load wave files in Wave file format (.WAV), AIFF file format (.AIF), or VariPhrase
format (.VPW).