Roland maxWerk Musical Instrument - Manual (Page 118)

118
Synchronization settings
V-Producer can use MIDI Clock or MTC (MIDI Time Code) to synchronize with a variety of other
software. This section explains various methods of synchronization.
Synchronizing as a slave (MIDI Clock)
If you want to synchronize V-Producer to a MIDI sequencer (ProTools, Logic, Cubase, Digital
Performer, etc.) installed in the same computer, using MIDI Clock for synchronization is the simplest,
so it is the recommended method. When synchronizing with MIDI Clock, V-Producer will play
according to the tempo of the master sequencer program.
If you want to synchronize with a MIDI sequencer that is running on the same computer, select the
MIDI device as “Roland VariOS Sync” (the dedicated synchronization port for the VariOS). Here we
will describe settings for some typical MIDI sequencers.