Roland maxWerk Musical Instrument - Manual (Page 78)

78
Editing in the Phrase Scope
■ Joining two notes
You can join two notes that were divided.
1. Adjust the two notes so that they are horizontally aligned.
2. Choose the bond ( ) from the tool buttons.
3. Click between the two notes that you want to join.
■ Editing the velocity
1. Using the [Controller select buttons] located at the left of the controller display area, choose
[VELOCITY] .
A graph of the velocities will be displayed.
2. Use the arrow cursor to directly drag the velocity graph upward or downward.
The graph you are editing will turn red.
3. If more than one note exists at the identical timing, click in the note display area on the note that
you want to edit, and the corresponding velocity graph will turn red.
* In the phrase scope, adjacent legato notes are located at the same pitch, the velocity of the second and
subsequent notes will be ignored. Even though you will be able to edit the velocity of the second and
subsequent notes on the screen, the sound produced by the VariOS when you play legato will use the
velocity of the first note located at that pitch.
fig.03VeloE
The velocities can be edited
in the screen, but when the
sound module plays these
notes, the second and
subsequent notes will have
the same velocity as the first
note.
Legato notes located at the
same pitch