Roland maxWerk Musical Instrument - Manual (Page 29)

29
Installation
Windows Me users
◆ Preparations for installing the driver
1
With the VariOS disconnected, start up Windows.
2
Exit all currently running software (applications).
Also, close any open windows. If you are using a virus checker or similar
software, be sure to exit this as well.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
4
Click the Windows start menu, and from the menu, select “Run...” .
Open the “Run...” dialog box.
5
In the dialog box that appears, input the following into the “Open” field,
and click [OK] .
D:\ENGLISH\DRIVER\USB_ME\SETUPINF.EXE
6
Open the SetupInf dialog box.
You are now ready to install the driver.
◆ Installing the driver
7
Use the USB cable to connect the VariOS to your computer.
fig.02-USB
8
Set the VariOS’s power switch to the ON position.
9
The New Hardware Found dialog box will appear.
Input the following into the “Copy files from” field, and click [OK] .
D:\ENGLISH\DRIVER\USB_ME
Disconnect all USB cables
other than those for a USB
keyboard or USB mouse.
The drive name “D:” may
be different depending on
your system. Type the
name of your CD-ROM
drive.
USB cable
VariOS
(Rear)
Computer
USB connector
You must power up the
VariOS according to the
procedure given on p. 43.
The drive name “D:” may
be different depending on
your system. Type the
name of your CD-ROM
drive.