Roland maxWerk Musical Instrument User Manual
Page 37
37
Installation
• Set “Port 2” to “Roland VariOS External MIDI”
• Set “DX7 II” to Roland VariOS Sync”
* For “DX7 II,” you must check all of the items in field
. (By default these are
unchecked.) If these are left unchecked, synchronization will not operate correctly.
fig.02-oms-set-6.eps
* If a dialog box similar to this appears, click
“No More Warnings.”
fig.02-oms-set-5.eps_50
9
From the
Edit
menu choose
OMS
MIDI Setup
. In the dialog box that
appears, check
[Run MIDI in the
background]
, and click
[OK]
.
10
From the
File
menu, choose
Make
Current
. If you are unable to select
Make Current
, it has already been
applied, and you may continue to the
next step.
11
To verify that MIDI transmission and reception are occurring normally,
choose
[Test Studio]
from the
Studio
menu.
You will enter MIDI transmission/reception test mode, and the cursor will
change to a
shape. When the cursor changes to the shape, click the
"Roland VariOS MIDI (Port 1)"
icon you specified earlier. If the
“MIDI”
indicator of the VariOS (front panel) blinks, the settings have been made
correctly.
If MIDI transmission cannot be performed, the Macintosh warning sound
will play. Once again, check that all devices are set correctly. Then choose
[Test Studio]
from the Studio menu, and exit test mode.
12
From the
File
menu choose
Quit
to exit
OMS Setup
. A dialog box will
suggest that you save, so click
[Save]
. Basic settings for OMS are now
completed.
You have now finished installing the VariOS driver.
Proceed to
A diamond mark(
) indicated the settings are enabled.