Roland Fantom-S88 - Manual (Page 4)

4
USING THE UNIT SAFELY
015
• Do not force the unit’s power-supply cord to share an
outlet with an unreasonable number of other devices. Be
especially careful when using extension cords—the total
power used by all devices you have connected to the
extension cord’s outlet must never exceed the power
rating (watts/amperes) for the extension cord. Excessive
loads can cause the insulation on the cord to heat up and
eventually melt through.
..........................................................................................................
016
• Before using the unit in a foreign country, consult with
your retailer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the “Infor-
mation” page.
..........................................................................................................
022a
• Always turn the unit off and unplug the power cord
before attempting installation of the circuit board (SRX
Series; p. 203).
..........................................................................................................
023
• DO NOT play a CD-ROM disc on a conventional audio
CD player. The resulting sound may be of a level that
could cause permanent hearing loss. Damage to speakers
or other system components may result.
..........................................................................................................
101a
• The unit should be located so that its location or position
does not interfere with its proper ventilation.
..........................................................................................................
101c
• This unit for use only with Roland stand KS-12 (Fantom-
S)/KS-17(Fantom-S88). Use with other stands is capable
of resulting in instability causing possible injury.
..........................................................................................................
102b
• Always grasp only the plug on the power-supply cord
when plugging into, or unplugging from, an outlet or this
unit.
..........................................................................................................
104
• Try to prevent cords and cables from becoming
entangled. Also, all cords and cables should be placed so
they are out of the reach of children.
..........................................................................................................
106
• Never climb on top of, nor place heavy objects on the
unit.
..........................................................................................................
107b
• Never handle the power cord or its plugs with wet hands
when plugging into, or unplugging from, an outlet or this
unit.
..........................................................................................................
108a
• Before moving the unit, disconnect the power plug from
the outlet, and pull out all cords from external devices.
..........................................................................................................
109a
• Before cleaning the unit, turn off the power and unplug
the power cord from the outlet.
..........................................................................................................
110a
• Whenever you suspect the possibility of lightning in your
area, pull the plug on the power cord out of the outlet.
..........................................................................................................
115a
• Install only the specified circuit board(s) (SRX Series).
Remove only the specified screws (p. 203).
..........................................................................................................
118
• Should you remove screws, make sure to put them in a
safe place out of children's reach, so there is no chance of
them being swallowed accidentally.
Before using the stand, be sure to read the owner's
manual included with it.
The display screens printed in this owner's
manual are based on the factory settings.
However, please be aware that in some cases
they may differ from the actual factory settings.