Select the rhythm group, Rhythm pattern settings, Selecting rhythm patterns – Roland Fantom-S88 User Manual
Page 113: Changing the beat and shuffle (grid), 113 playing rhythms
113
Playing Rhythms
Playing Rhythms
Select the Rhythm Group
1. Press ARPEGGIO/RHYTHM [SELECT/EDIT].
2. Press [1 (Rhythm Group)].
A screen like the one below appears.
If Performance mode is selected, (Performance) will appear at
the right of “Rhythm Group.”
fig.RPTN05
* When you select the Rhythm group, the most suitable rhythm set is
assigned to the Pad part. (In the screen, this is indicated by
“Recommended Rhy (Recommended Rhythm set).”)
3. Turn the VALUE dial or press [INC] or [DEC] to make the
setting.
This selects the Rhythm group’s basic performance Style.
Value: P01–32 (Preset), U01–32 (User)
4. When you have made the setting, press [EXIT].
For more on the prepared Rhythm Patterns already
programmed in the Fantom-S, refer to Sound List.
Rhythm Pattern Settings
1. Press ARPEGGIO/RHYTHM [SELECT/EDIT].
2. Press [2 (Rhythm)].
A screen like the one below appears.
If Performance mode is selected, (PERFORMANCE) will appear
at the right of “Rhythm.”
fig.RPTN01_50
3. Press
or
to move the cursor to each parameter, and
either turn the VALUE dial or press [INC] or [DEC] to make
the setting.
4. Press [6 (Start/Stop)].
5. When you have made the setting, press [EXIT].
The rhythm pattern will be sounded.
Selecting Rhythm Patterns
Select the basic playing style of the rhythm.
This selects the rhythm’s basic performance Style.
Value: P001–256 (Preset), U001–256 (User)
For details on the settings, refer to “Rhythm Pattern Settings”
(p. 113)
For more on the prepared Rhythm Patterns already
programmed in the Fantom-S, refer to Sound List.
Changing the Beat and Shuffle (Grid)
This sets the particular note division and resolution in a “single
grid” used in creating the pattern in an Rhythm Pattern, and how
much of a “shuffle” syncopation is to be to applied (none/weak/
strong) to it (grid type).
* Grid settings are shared with the arpeggio.
For details on the settings, refer to “Arpeggio Settings” (p. 105)
Value:
1/4:
Quarter note (one grid section = one beat)
1/8:
Eighth note (two grid sections = one beat)
1/8L:
Eighth note shuffle Light
(two grid sections = one beat, with a light shuffle)
1/8H:
Eighth note shuffle Heavy
(two grid sections = one beat, with a heavy shuffle)
1/12:
Eighth note triplet (three grid sections = one beat)
Using a controller to adjust the playback tempo
Since tempo control is assigned to one of the Fantom-S’s
realtime control knobs, it’s easy to adjust the tempo at which the
rhythm pattern will play back.
fig.09-04ab
1. Press the REALTIME CONTROL button so the ARP/RHY
indicator lights.
2. Play an Rhythm Pattern, and turn the realtime control
knob.
Tempo