Using the easy install feature – Paradyne CSU User Manual

Page 47

4. Configuration Options

9128-A2-GB20-80

September 2002

4-3

Using the Easy Install Feature

The Easy Install feature provides a straight-forward installation menu that requires
minimal configuration to get the FrameSaver unit up and running quickly, and to set
up remote configuration and management via Telnet access from the NOC
(Network Operations Center).

Main Menu

→

Easy Install

Easy Install Screen Example *

* The Ethernet Management Options Screen applies to the 9126-II (both CSU/DSU

and Router) and 9128-II. For the Model 9126, DS0 Base Rate (Kbps) appears after
the Network 1 Line Coding Format option.

To remotely access the FrameSaver unit in Frame Relay mode, use the Dedicated
Network Management Link that was created during installation, using the Node IP
Address that was entered for the unit.

See the

FrameSaver SLV 9126-II 1-Slot Unit Installation Instructions

, the

FrameSaver SLV 9128/9128-II 1-Slot Unit Installation Instructions

, or the

FrameSaver SLV 9128/9128-II Network Access Module (NAM) Installation
Instructions

for additional information and installation procedures.

main/easy_install 9128-II

Device Name: Node A 08/23/2002 11:04

EASY INSTALL

Service Type: Frame Relay

Node IP Address: 000.000.000.000 Clear