Konica Minolta Polygon Editing Tool - Manual (Page 93)

91
Chapter
2
File
Menu
900
910
File – Import – Digitizer – Step Scan (When VIVID 900/910 is Selected)
5 In the [Hardware] tab, select the de-
sired rotation step from “90”, “60” and
“Other” so that the rotating stage will
rotate at the selected step.
If “Other” is selected, enter the desired rota-
tion angle.
M
emo
To check whether the object is scanned properly when it
is rotated, click [Check scanning area].
While the rotating stage rotates at the step selected by Ro-
tation Step, the monochrome image acquired from each
angle will be displayed in the preview area.
When the rotating stage completes one turn, it will return
to the home position and the check is complete.
If any problem is detected, repeat step 4.
Note
The rotating stage may rotate in the opposite direction
during measurement depending on its type.
6 In the [General] tab, select the desired
scan mode (Fine or Fast).
7 Set optional parameters.
• Check the [Convert] checkbox of the [Scan &
Functions] in the [General] tab.
Note
If high measurement accuracy is required, set the dis-
tance parameter in the [General] tab.