Konica Minolta Polygon Editing Tool User Manual

Page 45

Chapter

File
Menu

File – Import – Digitizer – Step Scan (When VIVID 9i is Selected)

Set optional parameters.

Item

Explanation

Scan Parameter

Sets the settings for scanning.

Convert Parameter

Sets the settings for three-
dimensionalization.

Stage Parameter

Select the rotary stage to be
used.

[Default] button

Clicking this restores the
default settings.

Ref.

For details, refer to the parameters (P.49) for [File-

Import-Digitizer-Step Scan-Option] dialog box.

Click the [Apply] button to check

whether the rotary stage has been ini-
tialized successfully.

If the rotary stage has been initialized success-
fully, the [Scan] button will be effective.

• If initialization is not successful, turn off the

power to the rotary stage power, turn it on again,
and then click the [Apply] button.

• Select “Free” for [Rotation Step] in [Stage Param-

eter] field, and click [Apply]. If the stage has been
recognized properly, a stage slide bar and [Chart
Scan] button will be displayed at the bottom of
the work window when the [File-Import-Digi-
tizer-Step Scan-Option] dialog box is closed.

After necessary settings are made,

click the [OK] button.

The settings will be set and the [File-Import-
Digitizer-Step Scan-Option] dialog box will
close.

• If the rotary stage has already been used and if there

is no

need to change the settings, initialization of the

rotary stage can be performed by clicking on the [Stage
Apply] button in the [File-Import-Digitizer-Step Scan]
dialog box instead of the [File-Import-Digitizer-Step
Scan-Option] dialog box.